ALINCO DJ-C5T MARS/CAP

PERMIT REQUIRED

1. Remove the three case screws on the rear of the DJ-C5T.
2. Carefully remove the rear case to expose the main circuit board.
3. Locate and cut the RED wire loop towards the middle of the circuit board.
* The red wire is a loop about 5/8" long located about " from the charging jack in the 2:00 position.
4. Reassemble the radio.
5. Reset the CPU (press the FUNC key and the MW key while turning the radio on).

New frequency range :
RX 118.000 ~ 135.995 AM Aircraft

TX/RX 136.000 ~ 173.995 NFM

TX/RX 380.000 ~ 472.995 NFM