DJ-G7

Undocumented features for Alinco DJ-G7

More SET modes

Press the [V/P/M] key for about 2 seconds.

MONI: Item change and Dial:val.change appears on the display.

Press the [MONI] key to change the items and use the dial knob to change the values.

Item Default Value Value 2 Value 3 Value 4 Range Description
Vol display type Normal Center (Active) Center (Non. act.) - - Display options for volume values
Scan operation 1 touch 2 touch - - - Start scan operation by pressing SCAN 1 or 2 times.
MONI key TX DISABLE Sub-band Main-band L pow. Main-band H pow. - Options to use the MONI key as a second PTT
S METER Normal Simple - - - S Meter display options
FSK Round Time 2000ms. - - - 0 to 2540ms Packet communication parameter
FSK Tx Amount 20 - - - 0 to 254 Packet communication parameter

  

View  DJ-7G extended transmit / Mars mods videos

Extended TX mods

To open unit for 420-430 mhz and MARS operation remove battery, remove 2 long screws top 4 short screws middle and bottom, remove both knobs they are 2 pieces each, remove locking rings at both knobs.

Slide unit down and back towards you. You will see a blue jumper wire between test points 10 and 11. Remove jumper or snip and tab ends to prevent shorting.

Hold function button in while powering on!!!

New range 136-169.995 and 420-469.995. Remember MARS operation requires a permit. Use info at your own risk!!

                  

 

Belt Loop/ Clip Mod

One of the first things I noticed about the beautiful new Alinco DJ-G7 was the belt loop/ clip when I saw it on the web site. I had a feeling I was going to hate it and I was not disappointed.

Download the rest of the article here

Remember it is Illegal to transmit out of band. This Modification is for Informational purposes ONLY.
Doing such modifications on your radio may void any warranty and damage your equipment.
All mods found on this database are offered to me by other amateur radio hams or captured by Packet system. 
KB2LJJ  take no responsibility or liability for any damage done resulting from any modification.  

ATTENTION
The KB2LJJ takes no responsibility for any damage during the modification or for any wrong information made on this modification.