ALINCO DR110D

Remove top cover. Cut YELLOW wire which loops from left top corner of unit (just behind tuning knob) across the top of the radio. It is the only wire which is a complete 2" or so loop. While holding down the "F" and MHz" keys, power down the radio. While still holding them down, power up the radio. It is now set for "out of bounds" reception.

                                         DR110T

MOD FOR OUT OF BAND ENABLE PULL OFF TOP COVER , WITH RADIO KNOBS FACING YOU LOOK BEHIND THE VFO KNOB AND YOU WILL SEE A YELLOW WIRE , LAYING ON TOP OF THE VFO BOARD. CUT THE YELLOW WIRE AND TAPE END . REPLACE TOP COVER AND HOLD DOWN THE F KEY AND THE VFO KEY AT THE SAME TIME AND TURN ON THE RADIO AND RELEASE . HIT THE F & MHZ TO GET DIFFERENT RANGES OF RECEIVE. THE RADIO WILL HAVE TO BE RE-PROGRAMMED