ALINCO DR-110T

 Just want ed to reply to your message about the alinco mod. I  just got the answer i was looking for.
 Thought i would pass it along to you.


 Remove the top cover.
 Find the yellow wire at the front left corner (next to the tuning knob) it makes a loop about 1 1/2 inches  long.
 clip the wire in two and insulate.
 Replace top cover.
 Reset the radio as per the manual. ( i.e. hold f and vfo/m button down while turning the radio on.
 To change bands, press function followed by mhz button. The rig will change bands each time you do so.
 This should allow reception from 130 - 169.995 mhz,  the rig will also transmit from 103 - 169.995 mhz



 I  WANTED TO LET YOU KNOW ABOUT SOMETHING THAT THE MOD DOES,
 THAT I DIDN'T KNOW AT FIRST....

 130-170 RECEIVE AND XMIT
 340-380 RECEIVE ONLY