ICOM  IC-740
                              ~~~~~~~~~~~~~~~~~
                                 EXPD.  RF

  1- Remove the power and antenna.
  2- Remove the screws and open the radio.
  3- Locate  RF board.
  4- CUT white resistor jumper located between D-31 and "C" wire. 
  5- Reset the microprocessor.
  6- Reassemble the radio.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º  KB2LJJ BBS  RADIO MODS BATABASE  º   All the MODS are captured by packet.
ÈÍÍÍÍÍÍÍÍÍÍÍ»       ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ   This BBS taks no responsability or
ÉÍÍÍÍÍÍÍÍÍÍͼ       ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»   liability for any damege resulting
º     KB2LJJ @ KB2LJJ.NJ.USA.NA     º   from this modification.
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ   73s John kb2ljj SySoP