ICOM IC-751A 
                          ~~~~~~~~~~~~~~~~~~
                           EXPANDED   RF
     
 1- Remove power and antenna.
 2- Remove screws open case.
 3- Locate noise blanker board.( Near upper left hand of the front panel ).
 4- Locate and CUT resitor R-34. (far left end of the noise blanker board ).
 5- Reassemble the radio.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º  KB2LJJ BBS  RADIO MODS BATABASE  º   All the MODS are captured by packet.
ÈÍÍÍÍÍÍÍÍÍÍÍ»       ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ   This BBS taks no responsability or
ÉÍÍÍÍÍÍÍÍÍÍͼ       ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»   liability for any damege resulting
º     KB2LJJ @ KB2LJJ.NJ.USA.NA     º   from this modification.
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ   73s John kb2ljj SySoP