®
         Radio Mods Database        

              Web Page            http://www.kb2ljj.com                           Email                   webmaster@kb2ljj.com 

Kenwood TH-215A

KENWOOD TH-215A handheld transceiver out-of-band modification:

1. Remove the power and antenna
2. Remove 4 screws from back of panel
3. Carefully lift the front panel from the radio. 
Do not disconnect the flex cable.
4. Locate set of 4 jumpers:
5. CUT jumpers J1 and J2.
6. Reassemble the radio.
7. Reset microprocessor: Turn radio on while simultaneously pressing
both _F_ key and _ENTER_ key .

ALIGNMENTS

 VR 1 Low power
VR 2 Hi power
VR 5 S-Meter
 VR 6 DTMF
 VR 7 DEV.
 VR 8 PL Level
 


The Operating Frequencies are programmed by cutting jumpers as follows :

Jumpers. Transmit Freqs. Receive Freqs. Remarks.

No Cuts 144.0 - 145.995 144.0 - 145.995 TH-215E
J3 144.0 - 147.995 141.0 - 162.995 TH-215A
J3,J1 141.0 - 150.995 141.0 - 162.995
J3,J1,J4 141.0 - 162.995 141.0 - 162.995

All mods found on this database are offered to me by other amateur radio hams or captured by Packet system. 
KB2LJJ  take no responsibility or liability for any damage done resulting from any modification.  
 I have been trying to help our ham radio with the radio modifications and have asked for any type of new radio mods.
 However, I haven't received too many.  If all of you contributed a little more,  I believe I would be able to help 
all the other ham's that are looking for these mods. I know it is possible to get more mods from all the Ham's because of
 the wide range that exist throughout the world.  By doing this we can  flourish and enjoy more of this hobby that 
we've taken part in for so many years. Furthermore, I ask you not to forget to send me any modifications that you might
 have through email.  I would really appreciate it.

      Email                webmaster@kb2ljj.com

 73's
   John Ribeiro
             KB2LJJ