®    Radio Mods Database

           Web Page            http://www.kb2ljj.com             Email                   kb2ljj@pacnews.com
                                        
                                          KENWOOD TH-2600-A
                                                          TX


1. TO ACCESS THE 2600 LOOSEN THE TWO LARGE SCREWS ON THE SIDES OF THE 
UNIT WITH A COIN.

2. REMOVE THE 3 VERY SMALL PHILLIPS HEAD SCREWS ON THE BACK-SIDE OF
THE UNIT

3. REMOVE THE BATTERY.

4. IN THE BASE OF THE UNIT YOU WILL SEE FOUR PHILLIPS HEAD SCREWS
REMOVE THE TWO THAT HOLD DOWN THE FRONT OF THE UNIT (SPEAKER SIDE)

5. INSERT SCREWDRIVER INTO BASE & TWIST --YOU WILL HEAR A "POP" AS
THE TWO HALVS SEPARATE.

6. CAREFULLY LIFT FRONT & LET IT TURN TO THE RIGHT, AS THERE IS A
RIBBON CONNECTION BETWEEN THE FRONT COVER & THE CHASSIS.

7. IN THE LOWER RIGHT HAND CORNER OF THE P.C. BOARD YOU WILL SEE
A ROW OF DIODES ON END (ABT 7), SNIP THE TOP TWO. (THEY MAY
ALREADY HAVE A SOLDER JOINT, AS THESE ARE USED IN BENCH TEST)

8. NOTE: THESE ARE DIODES D-32 & D-33 THE BOARD YOU ARE WORKING ON
IS X55-1380-10 A/2

9. REVERSE THE PROCESS, & THERE YOU HAVE IT......



                             


All the mods are captured by Packet. 
KB2LJJ    Radio Mods Database 
take now responsibility or liability for any 
damage resulting from this modification.  
                                  
 I have been trying to help our ham radio with the radio modifications and have asked for any type of new radio mods.
 However, I haven't received too many.  If all of you contributed a little more,  I believe I would be able to help 
all the other ham's that are looking for these mods. I know it is possible to get more mods from all the Ham's because of
 the wide range that exist throughout the world.  By doing this we can  flourish and enjoy more of this hobby that 
we've taken part in for so many years. Furthermore, I ask you not to forget to send me any modifications that you might
 have through email.  I would really appreciate it.

      Email                kb2ljj@pacnews.com

 73's
   John Ribeiro
             KB2LJJ