®
Radio
Mods Database |
|
Web
Page
http://www.hostingme.com/kb2ljj
FTTP ftp://216.102.57.116 |
| KENWOOD TM-421A ~~~~~~~~~~~~~~~~~~ EXTENDED RF and ALIGNMENT CONTROLS 1- Remove power and antenna. 2- Remove top and bottom cover. 3- Remove the channel knob. 4- Remove the microphone ring. 5- Remove the volume and squelch knob. 6- Remove the front panel from the unit. 7- Remove the front control unit from the chassis 8- Locate component side of the control unit circuit board. 9- Locate and remove chip resistor R-25 and place it in empty space R-23. 10- Remove R-22. 11- Reassemble the radio. 12- Reset the microprocessor Press and hold [MR] wile turning the power ON CONTROLS: ~~~~~~~~~~ VR-1 S-Meter VR-3 Audio ADJ. VR-4 RF Meter VR-7 Low power TC-1 Freq ADJ. All the mods are captured by Packet. KB2LJJ Radio Mods Database take now responsibility or liability for any damage resulting from this modification. |
| I
have been trying to help our ham radio with the radio modifications and have
asked for any type of new radio mods. However, I haven't received too many. If all of you contributed a little more, I believe I would be able to help all the other ham's that are looking for these mods. I know it is possible to get more mods from all the Ham's because of the wide range that exist throughout the world. By doing this we can flourish and enjoy more of this hobby that we've taken part in for so many years. Furthermore, I ask you not to forget to send me any modifications that you might have through email. I would really appreciate it.
Email
kb2ljj@pacnews.com 73's |