FT-1000
 
                           OUT OF BAND TX MOD 
                        -------------------------
 
 
 1. REMOVE POWER AND ANT.
 2. OPEN CASE LIKE EXPLAINED IN YOUR "OPERATING MANUAL".
 3. LOCATE FOUR SCREWS ATTACHING FROUNT PANEL AND REMOVE THE TOP SCREWS.
    LOOSEN THE BOTTOM SCREWS.
 4. TILT FROUNT PANEL FORWARD.
 5. ON THE LEFT SIDE OF THE RADIO, REMOVE THE PLUG FROM POWER SUPPLY TO
    THE FROUNT PANEL. (GRAY AND WHITE WIRES.)
 6. LOCATE THE JUMPER POSITION 3 ON CONTROL BOARD.
 7. CHANGE THE JUMPER STATUS IN POSITION 3.
 8. REASSEMBLE RADIO.
 9. RESET CPU (see your OPERATING MANUAL).
 ÿ
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º  KB2LJJ BBS  RADIO MODS BATABASE  º   All the MODS are captured by packet.
ÈÍÍÍÍÍÍÍÍÍÍÍ»       ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ   This BBS takes no responsability or
ÉÍÍÍÍÍÍÍÍÍÍͼ       ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»   liability for any damege resulting
º     KB2LJJ @ KB2LJJ.NJ.USA.NA     º   from this modification.
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ   73s John kb2ljj SySoP