YAESU FT-711
                          ~~~~~~~~~~~~~~~~~~
                            EXPANDED  RF 
     
  1- Remove 5 screws from the top cover and remove the cover.
  2- Remove 5 screws from the bottom cover and remove the bottom.
  3- Umplug the speaker.
  4- Remove the 4 scres holding the front panel.
  5- Locate jumper PAD 7.
  6- Solder bridge pad 7.
  7- Locate the reset pins ( Located on the front panel and clearly marked.
  8- SHORT the reset pins together for ONE second.
  9- Reassemble the radio.

  Alignment Controls:
                      TC-1003 Freq Adj.
                      VR-1005 Beep Level
                      VR-1006 Hi Power
                      VR-1007 Low Power
                      VR-1008 Dev Low
                      VR-1009 Dev Hi


ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»   All the MODS are captured by Packet.
º  KB2LJJ BBS  RADIO MODS BATABASE  º   This BBS takes no responsibility or
ÈÍÍÍÍÍÍÍÍÍÍÍ»       ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ   liability for any damege resulting
ÉÍÍÍÍÍÍÍÍÍÍͼ       ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»   from this modification.
º     KB2LJJ @ KB2LJJ.NJ.USA.NA     º   73s John kb2ljj SySoP.
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ